In-Wall / 802.11b/g Wireless Access Point
Does NOT include Power over Ethernet Power Injector
802.11B/G In-Wall wireless access point.
The HD25140 802.11B/G wireless access point is designed to fit into a standard single gang box. Finally a solution to fixing WiFi range problems.
Range problems are a function of the client devices. The laptop, the iPhone, the WiFi desktop card, the wireless control tablet and so on. These are all low-power devices. Typically only 23 to 63 mW. The answer to better WiFi is locating the wireless access point closer to the user. You can not do that with conventional wireless routers or access points. Nobody wants a box in their bedroom or kitchen with antennas sticking out of it. The beauty of the in-wall wireless access point is you can put the devices where the user is located when using their WiFi-enabled devices. Thus creating better WiFi connections and faster connection speeds.
In basic terms, it is like two people playing catch with a baseball. One person can throw the ball 500 feet but the other can only throw the ball 100 feet. You can not play catch unless you are within that 100 feet of each other. A common question we get is, "then why when I install a higher-power booster or higher-gain antenna do I see 5 bars now on my laptop." Well, sure. Now you have a person who can throw the ball 1000 feet. You still are not going to have a successful catch unless you are within that 100 feet. WiFi is a two-way system. You request information from the router, then the router sends you the information. If you cannot request the information because you are too far, you have no WiFi.
The HD25140 can be installed and configured easily into any new wireless network or integrated within an existing wired network resulting in a more flexible and cost-effective wireless deployment. And a network administrator can centrally manage the HD25140 via a Web browser or an SNMP MIB browser. With included PoE, power and data are supplied to the unit using CAT5 Ethernet cable. For large installations the HD25140 is available without a PoE injector and will work with any 803.AF compliant POE switch.
Ideal For:
* Hotels
* Motels
* Offices
* Hospitals
* Schools
* Residential Homes
* Apartment Buildings