|
Inova OnTime analog clocks make it simple to keep time accurate and consistent throughout a facility. Plug them into a standard Ethernet jack, and the clocks automatically receive time updates from a Simple Network Time Protocol server, eliminating the need for specialized software or a master clock. Thanks to a revolutionary design, that same Ethernet connection also provides the clock’s power! No AC outlet is required.
Technical Details
- Power for Inova OnTime clocks is supplied over standard Cat-5 (or better) cabling using the IEEE 802.3af Power over Ethernet standard – the same power source as VoIP phones
- Time updates are received over the network from a Simple Network Time Protocol server
- Clocks are DHCP or static IP compatible (clocks ship DHCP enabled)
- Clocks support Telnet sessions for IP configuration, setting SNTP server address, setting daylight savings time and time zone offset from UTC, and status reporting
NOTE – Power over Ethernet must be enabled on your network for Inova OnTime clocks to operate. If you aren’t sure whether PoE is enabled on your network, please verify this with your IT department before placing an order.
Product Specifications
- Dimensions: 13 3/8" diameter, 7 1/4" deep
- Viewing Distance 100+ feet, each side
- Accuracy: +/- approximately 0.5 seconds
- Operating Temperature: 32º to 104º F (Oº to 40ºC)
- Operating Humidity: 95% maximum, non-condensing
- Power Consumption: 6 watts
- Mounting Options: Surface, Double-sided
- Weight: 8 lbs
- Cabinet: Plastic
- Certifications: UL/CSA 60950-1, RoHS compliant
| 
Email Us: 
